Leviton ODS0D-IDA Dual-Relay Decora Wall Switch Passive Infrared (PIR) Occupancy Sensor – Almond

– 180° field-of-view provides approximately 2100 square feet of coverage, suitable for a variety of commercial areas.

– Segmented Fresnel lens provides optimum sensitivity and perf o r mance. Designed with an extensive “small motion” area where even slight body movements will be detected.

– Horizontal field of view may be adjusted between 180° and 32° arc by using integral blinders located on either side of the lens.

– Optional manual adjustment for delayed-OFF time settings of 30 seconds (for walking test), 5 minutes, 10 minutes and 20 minutes. Allows customized adjustments to maximize energy savings.

– Adjustable Ambient Light Override ranges from approximately 2 foot-candles (2 lux) to 500+ foot-candles (500+ lux).

– Self-Adjusting Ambient Light Override compensates for changes in lighting requirements after override level has been set.

– Manual -ON / Automatic-OFF mode for installations where manual ON switching is required but automatic OFF switching is still desired for energy savings.

– LED indicator light flashes when sensor detects motion to verify detection is active.

– Unit beeps 3 times after delayed-OFF time expires, then waits 10 seconds before turning lights OFF.

– One unit can be used for either 120V or 277V lighting. Compatible with both electronic and magnetic ballasts.

– Primary relay switches at the zero crossing point of the AC power curve to ensure longer contact life and compatibility with electronic ballasts.

– Unit fits in standard single-gang wallbox and replaces two single-pole wall switches; ground connection required. Gangable with other devices.

– C UL / US Certified, complies with California Title 24 Energy Code and FCC Regulations.

– Limited Five-Year Warranty

Online Manual

Complete Spec From Leviton